Rice-lake Counterpart Configurable Counting Indicator - Inst User Manual Page 79
- Page / 112
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Serial Commands 73
6.1.2 ID Commands
Up to 150 codes can be entered under ID commands.
6.1.3 Reporting Commands
Reporting commands send specific information to the serial port. The commands listed in Table 6-3 can be used in
all modes.
Transmit all configuration settings with the DUMPALL command.
KENTER Press the ENTER key.
KLOCK Lock specified front panel key. For example, to lock the ZERO key, enter KLOCK = KZERO.
KUNLOCK Unlock specified front panel key. For example, to unlock the PRINT key, enter KUNLOCK = KPRINT.
KDATE Display date (pseudo key).
KTIME Display time (pseudo key).
KESCAPE Exits the selected parameter. Returns to weigh mode if a parameter is not selected (functions identical to the
MENU key in menu mode).
KSOFTx Press softkey number x
Command Function
ID.CODE#n ID code
ID.DESC#n Item description
ID.LOCATION#n Item stock location
ID.LOT#n Lot number
ID.PARTNUMBER#n Part number
ID.QUANTITY#n Inventory quantity
ID.TARE#n Tare weight value
ID.UNITS#n Units for tare and unit weight values
ID.UNITWEIGHT#n Unit weight value
ID.CLRALL Clear all IDs from memory
Note: The ID.CLRALL command only works in setup mode
ID.CLEAR.INDEX#n Clear ID at index n from memory
ID.CLEAR.CODE#n Clear ID with code of n from memory
Table 6-2. ID Commands
Command Function
DUMPALL List all parameter values, ID information and setpoint data
DUMPCONFIG List all parameter values excluding ID information and setpoint data
DUMPAUDIT List audit trail information
DUMPBUFFER Lists Weighvault buffer information
DUMPIDS List all ID information
DUMPID.INDEX List a specific ID by index. See Section 6.1.7 on page 78 for more information.
DUMPIDCODE List a specific ID by code. See Section 6.1.7 on page 78 for more information.
VERSION
Write Counterpart software version
P Write current displayed weight with units identifier. See Section 9.2.1 on page 90.
XE Returns a 10-digit code representing any error conditions currently shown on the front panel.
ADCS Return number of A/Ds installed
Table 6-3. Reporting Commands
Command Function
Table 6-1. Serial Key Press Commands
Note
- Counterpart 1
- User Manual 1
- Contents 3
- About This Manual 7
- 1.0 Introduction 8
- 1.4 Keypad Functions 9
- 1.5 Tare Recall 10
- 1.6 Annunciator Symbols 10
- 1.7 Softkey Setup 11
- 1.9 Indicator Operations 11
- 2.0 Installation 13
- Important 13
- 2.3 Enclosure Disassembly 15
- 2.5 Making Power Connections 16
- 2.6 Load Cell Wiring 16
- 2.7 Wire Specifics 17
- 2.8 Cable Grounding 18
- 2.9 Enclosure Reassembly 19
- 2.10 CPU Board Removal 19
- 2.13 Installing Option Cards 21
- Figure 2-14. CPU Board 22
- Counterpart Front View 25
- Counterpart Dimensions 27
- 3.0 Configuration 28
- 3.3 Revolution Configuration 29
- 3.4 ID Menu 30
- 3.5 Audit Menu 31
- 3.6 Calibration Menu 32
- 3.7 Setup Menu 33
- 3.7.1 Scale Menu 34
- Scale Calibration Menu 37
- Scale Format Menu 38
- Scale Format Menu Parameters 39
- 3.7.2 Feature Menu 40
- UNITWTUPDATE 41
- Feature Count Menu 42
- Feature Region Menu 44
- SOFTKEYS Menu 45
- Regulate Industry Menu 46
- 3.7.3 Serial Menu 48
- 3.7.4 Ethernet Menu 50
- 3.7.5 Print Format Menu 51
- 3.7.6 Scale Setpoints Menu 52
- LIST OF 53
- 3.7.7 DIG I/O Menu 56
- 3.8 Test Menu 57
- 3.9 Display Menu 58
- SETPT 2 - 6 59
- 4.0 Calibration 61
- 4.2 Five-point Linearization 62
- 4.3 Rezero 62
- 4.4 EDP Command Calibration 62
- 4.5 Revolution 63
- Calibration 63
- 4.6 More About Calibration 64
- 5.0 Scale Operations 65
- 0.000653642 - 0.000653 x 100 66
- 0.000653642 66
- = 0.098% 66
- Figure 5-1. ID Menu 68
- 5.5.2 Using a Stored ID 69
- 5.5.4 Clearing ID Codes 70
- 5.6 WeighVault 71
- 5.6.2 Using WeighVault 72
- 5.7 Totalization Counts 73
- 5.8 Parts Reduction Counts 74
- 5.10 Batch Operations 75
- DIGITAL I/O 76
- 5.12 USB Keyboard 77
- 6.0 Serial Commands 78
- 6.1.2 ID Commands 79
- 6.1.3 Reporting Commands 79
- 6.1.6 Normal Mode Commands 84
- 6.1.7 Unique Commands 84
- 7.0 Print Formatting 85
- Table 7-3. H1, H2 Formats 88
- 7.2 Customizing Print Formats 89
- 7.2.3 Using Revolution 90
- 7.2.4 Print Label Examples 90
- Count Format 91
- Pallet Label Format 91
- Gross Label Format 91
- Setpoint Format 92
- Total Label Format 92
- Gross/Tare/Net Label Format 93
- Accum Label Format 93
- 8.1 Enclosure Disassembly 94
- 8.2 WLAN Card Installation 94
- - - - - - 95
- 9.2.1 Using the P EDP Command 96
- <LF> 97
- 9.6 Digital Filtering 100
- 9.6.4 Audit Trail Support 101
- 9.7 USB Keyboard Interface 102
- 9.8 Serial Scale Interface 102
- 9.9 Regulatory Mode Functions 103
- 9.11 Updating Firmware 105
- Figure 9-4. Revolution Screen 106
- 9.12 Specifications 107
- 9.13 Specifications 108
- Counterpart Limited Warranty 109
- For More Information 110
Related products and manuals for Scales Rice-lake Counterpart Configurable Counting Indicator - Inst
Scales Rice-lake CW-90X Base User Manual
(16 pages)
(16 pages)
© 2020, manymanuals.com. All rights reserved. | 6.096 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals