Rice-lake Counterpart Configurable Counting Indicator - Inst User Manual Page 68
- Page / 112
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
62 Counterpart Counting Scale Indicator
Counting Out of a Full Container — See Total Amount Remaining in the Container
To carry out this operation you must know the tare weight ahead of time.
1. Place the full container on the scale. Press the TARE key.
2. Remove a 10 piece sample from the container and press the SAMPLE key. After the unit weight has been
calculated, return the sample to the container.
3. If you want to see how many are still in the bin, you first have to know the tare weight of the bin or
container. After removing the parts you want to take out of the bin, enter the tare weight of the bin and
press the
TARE key. The scale will display how many parts were left in the bin. To print a label to put on the
bin showing the total quantity in the bin, press the
PRINT key.
Negative Counting — Total Removed Displayed at the End
With this procedure you can count accurately out of a full container for kitting or shipping without having to know
the tare weight of the container.
1. Place a full container on the scale and press TARE.
2. Remove a 10 piece sample from the container and press SAMPLE. After the unit weight has been
calculated, return the sample to the container.
3. Remove the number of pieces you need for kitting or shipping. The amount removed will be displayed. If
you need a label for each kit or container, press the
PRINT key after removing each batch of pieces.
5.5 IDs
IDs are used to save and recall previously set codes, descriptions, unit weight, and tare preferences. The
Counterpart has the capacity to store up to 150 individual IDs. There are three ways IDs can be entered and set:
1. Normal
2. Through Count Mode
3. Through Revolution
To enter alpha ID characters, double press the numeric keypad to obtain alpha characters.
To store more than 150 IDs, WeighVault is required (see Section 5.6 on page 65).
Figure 5-1. ID Menu
VALUE VALUE VALUE VALUE
VALUE
QUANTITY
VALUE
CODE
VALUE
DESC
VALUE
PART NUM
LOT UNIT WT TARE UNITS LOCATION
REG 1 REG 2-150
SAME AS REG 1
G
OZ
OFF
KG
LB
ID DISPLAYTESTSETUPAUDIT CALIBR SETPTS
- Counterpart 1
- User Manual 1
- Contents 3
- About This Manual 7
- 1.0 Introduction 8
- 1.4 Keypad Functions 9
- 1.5 Tare Recall 10
- 1.6 Annunciator Symbols 10
- 1.7 Softkey Setup 11
- 1.9 Indicator Operations 11
- 2.0 Installation 13
- Important 13
- 2.3 Enclosure Disassembly 15
- 2.5 Making Power Connections 16
- 2.6 Load Cell Wiring 16
- 2.7 Wire Specifics 17
- 2.8 Cable Grounding 18
- 2.9 Enclosure Reassembly 19
- 2.10 CPU Board Removal 19
- 2.13 Installing Option Cards 21
- Figure 2-14. CPU Board 22
- Counterpart Front View 25
- Counterpart Dimensions 27
- 3.0 Configuration 28
- 3.3 Revolution Configuration 29
- 3.4 ID Menu 30
- 3.5 Audit Menu 31
- 3.6 Calibration Menu 32
- 3.7 Setup Menu 33
- 3.7.1 Scale Menu 34
- Scale Calibration Menu 37
- Scale Format Menu 38
- Scale Format Menu Parameters 39
- 3.7.2 Feature Menu 40
- UNITWTUPDATE 41
- Feature Count Menu 42
- Feature Region Menu 44
- SOFTKEYS Menu 45
- Regulate Industry Menu 46
- 3.7.3 Serial Menu 48
- 3.7.4 Ethernet Menu 50
- 3.7.5 Print Format Menu 51
- 3.7.6 Scale Setpoints Menu 52
- LIST OF 53
- 3.7.7 DIG I/O Menu 56
- 3.8 Test Menu 57
- 3.9 Display Menu 58
- SETPT 2 - 6 59
- 4.0 Calibration 61
- 4.2 Five-point Linearization 62
- 4.3 Rezero 62
- 4.4 EDP Command Calibration 62
- 4.5 Revolution 63
- Calibration 63
- 4.6 More About Calibration 64
- 5.0 Scale Operations 65
- 0.000653642 - 0.000653 x 100 66
- 0.000653642 66
- = 0.098% 66
- Figure 5-1. ID Menu 68
- 5.5.2 Using a Stored ID 69
- 5.5.4 Clearing ID Codes 70
- 5.6 WeighVault 71
- 5.6.2 Using WeighVault 72
- 5.7 Totalization Counts 73
- 5.8 Parts Reduction Counts 74
- 5.10 Batch Operations 75
- DIGITAL I/O 76
- 5.12 USB Keyboard 77
- 6.0 Serial Commands 78
- 6.1.2 ID Commands 79
- 6.1.3 Reporting Commands 79
- 6.1.6 Normal Mode Commands 84
- 6.1.7 Unique Commands 84
- 7.0 Print Formatting 85
- Table 7-3. H1, H2 Formats 88
- 7.2 Customizing Print Formats 89
- 7.2.3 Using Revolution 90
- 7.2.4 Print Label Examples 90
- Count Format 91
- Pallet Label Format 91
- Gross Label Format 91
- Setpoint Format 92
- Total Label Format 92
- Gross/Tare/Net Label Format 93
- Accum Label Format 93
- 8.1 Enclosure Disassembly 94
- 8.2 WLAN Card Installation 94
- - - - - - 95
- 9.2.1 Using the P EDP Command 96
- <LF> 97
- 9.6 Digital Filtering 100
- 9.6.4 Audit Trail Support 101
- 9.7 USB Keyboard Interface 102
- 9.8 Serial Scale Interface 102
- 9.9 Regulatory Mode Functions 103
- 9.11 Updating Firmware 105
- Figure 9-4. Revolution Screen 106
- 9.12 Specifications 107
- 9.13 Specifications 108
- Counterpart Limited Warranty 109
- For More Information 110
Related products and manuals for Scales Rice-lake Counterpart Configurable Counting Indicator - Inst
Scales Rice-lake CW-90X Base User Manual
(16 pages)
(16 pages)
© 2020, manymanuals.com. All rights reserved. | 1.556 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals