Rice-lake Counterpart Configurable Counting Indicator - Inst User Manual Page 28
- Page / 112
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
22 Counterpart Counting Scale Indicator
3.0 Configuration
The Counterpart scale can be configured using a series of menus accessed through the scale front panel when the
scale is in setup mode.
Figure 3-1 and Table 3-1 on page 22 summarizes the functions of each of the top level
menus.
To navigate through the menus, use the front panel keys and shown in Figure 3-2 on page 22.
3.1 Front Panel Configuration
To set up and configure the Counterpart counting scale, select the MENU key on the front panel. The default for the
indicator is set at the factory with the audit trail jumper (JMP1) in the ON position, allowing configuration access
by pressing the
MENU key. Pressing the MENU key will take you to the Audit menu selection. Use the SAMPLE ( )
and PRINT ( ) navigation keys to move to other menu selections. Use the NET/GROSS ( ) and ZERO ( )
navigation keys to enter and exit menu selections.
Figure 3-1. Menu Mode Navigation Structure
3.2 Menu Navigation
Once you have entered the menus, you can use the front panel buttons to navigate. Note the looped menu structure
shown in
Figure 3-1. This provides a shortcut for accessing the right-most menu items by navigating to the left, and
vice versa for the opposite side of the menu. This shortcut also holds true for sub-menu navigation.
Figure 3-2. Front Panel Key Functions in Menu Mode
Various keys are used as directional keys to navigate through the menus. The SAMPLE ( ) and PRINT ( ) keys
scroll left and right (horizontally) on the same menu level; ZERO ( ) and GROSS/NET ( ) move up and down
(vertically) to different menu levels. Each of these keys has a directional symbol indicating its menu navigation
function. The
TARE (EN TER) key has the same function as GROSS/NET ( ) when navigating the menu — either will
move down to access subcategories of a main menu item. The SAMPLE ( ) and PRINT ( ) keys navigate to another
digit. The numeric keys can also be used to insert a digit to the right of the blinking digit. Press TA RE (ENTER) to
accept the data and return to the next menu item.
Menu Function
ID ID Allows you to setup or edit IDs.
AUDIT Audit Trail Displays the legally relevant (LR) firmware version, configuration count, and calibration
count.
CALIBR Calibrate Calibrates the scale.
SETUP Setup Accesses setup options for the scale, features, serial output, print format, digital inputs
and outputs, and displays the version number.
TEST Test Performs a basic test on the A/D, digital inputs and outputs, communication ports, RAM,
and keypad.
DISPLAY Display Accesses the setup option for contrast, image, brightness.
SETPTS Setpoints Used for setting up weighmode setpoint accessible parameters using numeric values.
Table 3-1. Menu Summary
Note
DISPLAYTESTSETUPAUDIT CALIBR SETPTSID
See
Figure 3-4
See
Figure 3-5
See
Figure 3-6
See
Figure 3-4
See
Figure 3-4
See
Figure 3-4
See
Figure 3-4
ZERO
B/N
GROSS
NET
TARE SAMPLE
Pieces
PRINT
UNIT
WEIGHT
MENU
SETUP
UNITS
TOGGLE
Move UP/
Increment
value
Move
DOWN/
Increment
value
Enter Key Move
LEFT/
previous
Enter
MORE/
Move
forward
- Counterpart 1
- User Manual 1
- Contents 3
- About This Manual 7
- 1.0 Introduction 8
- 1.4 Keypad Functions 9
- 1.5 Tare Recall 10
- 1.6 Annunciator Symbols 10
- 1.7 Softkey Setup 11
- 1.9 Indicator Operations 11
- 2.0 Installation 13
- Important 13
- 2.3 Enclosure Disassembly 15
- 2.5 Making Power Connections 16
- 2.6 Load Cell Wiring 16
- 2.7 Wire Specifics 17
- 2.8 Cable Grounding 18
- 2.9 Enclosure Reassembly 19
- 2.10 CPU Board Removal 19
- 2.13 Installing Option Cards 21
- Figure 2-14. CPU Board 22
- Counterpart Front View 25
- Counterpart Dimensions 27
- 3.0 Configuration 28
- 3.3 Revolution Configuration 29
- 3.4 ID Menu 30
- 3.5 Audit Menu 31
- 3.6 Calibration Menu 32
- 3.7 Setup Menu 33
- 3.7.1 Scale Menu 34
- Scale Calibration Menu 37
- Scale Format Menu 38
- Scale Format Menu Parameters 39
- 3.7.2 Feature Menu 40
- UNITWTUPDATE 41
- Feature Count Menu 42
- Feature Region Menu 44
- SOFTKEYS Menu 45
- Regulate Industry Menu 46
- 3.7.3 Serial Menu 48
- 3.7.4 Ethernet Menu 50
- 3.7.5 Print Format Menu 51
- 3.7.6 Scale Setpoints Menu 52
- LIST OF 53
- 3.7.7 DIG I/O Menu 56
- 3.8 Test Menu 57
- 3.9 Display Menu 58
- SETPT 2 - 6 59
- 4.0 Calibration 61
- 4.2 Five-point Linearization 62
- 4.3 Rezero 62
- 4.4 EDP Command Calibration 62
- 4.5 Revolution 63
- Calibration 63
- 4.6 More About Calibration 64
- 5.0 Scale Operations 65
- 0.000653642 - 0.000653 x 100 66
- 0.000653642 66
- = 0.098% 66
- Figure 5-1. ID Menu 68
- 5.5.2 Using a Stored ID 69
- 5.5.4 Clearing ID Codes 70
- 5.6 WeighVault 71
- 5.6.2 Using WeighVault 72
- 5.7 Totalization Counts 73
- 5.8 Parts Reduction Counts 74
- 5.10 Batch Operations 75
- DIGITAL I/O 76
- 5.12 USB Keyboard 77
- 6.0 Serial Commands 78
- 6.1.2 ID Commands 79
- 6.1.3 Reporting Commands 79
- 6.1.6 Normal Mode Commands 84
- 6.1.7 Unique Commands 84
- 7.0 Print Formatting 85
- Table 7-3. H1, H2 Formats 88
- 7.2 Customizing Print Formats 89
- 7.2.3 Using Revolution 90
- 7.2.4 Print Label Examples 90
- Count Format 91
- Pallet Label Format 91
- Gross Label Format 91
- Setpoint Format 92
- Total Label Format 92
- Gross/Tare/Net Label Format 93
- Accum Label Format 93
- 8.1 Enclosure Disassembly 94
- 8.2 WLAN Card Installation 94
- - - - - - 95
- 9.2.1 Using the P EDP Command 96
- <LF> 97
- 9.6 Digital Filtering 100
- 9.6.4 Audit Trail Support 101
- 9.7 USB Keyboard Interface 102
- 9.8 Serial Scale Interface 102
- 9.9 Regulatory Mode Functions 103
- 9.11 Updating Firmware 105
- Figure 9-4. Revolution Screen 106
- 9.12 Specifications 107
- 9.13 Specifications 108
- Counterpart Limited Warranty 109
- For More Information 110
Related products and manuals for Scales Rice-lake Counterpart Configurable Counting Indicator - Inst
Scales Rice-lake CW-90X Base User Manual
(16 pages)
(16 pages)
© 2020, manymanuals.com. All rights reserved. | 3.893 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals