Rice-lake Star SP298 Series Programmers Manual User Manual download pdf (Page 35)

<ESC> “W” n

1B 57 n

Sets the magnification rate in character width

Prints the subsequent data with a character width magnified by a rate

specified by the value of n.

n= 0, “0”: Reset magnification (same as <DC4>)

1, “1”: Double magnification (same as <SO>)

<ESC> “h” n

1B 68 n

Sets the magnification rate in character height

Prints the subsequent data with a character height magnified by a rate

specified by the value of n.

n= 0, “0”: Reset magnification

1, “1”: Double magnification

<ESC> “–” n

1B 2D n

Underlining

When the value of n is 1, underlines the subsequent data including a

character spacing set by <ESC><SP> n.

The part to be skipped by the horizontal tab setting and the block

graphic characters are not underlined.

Resets the underline mode when the value of n is 0.

The value of n can be set to 0(00H) or “0”(30H), or 1(01H) or

“1”(31H).

<ESC> “_” n

1B 5F n

Upperlining

When the value of n is 1, over lines the subsequent data including a

character spacing set by <ESC><SP> n.

The part to be skipped by the horizontal tab setting and the block

graphic characters are not upper lined.

Resets the upper line mode when the value of n is 0.

The value of n can be set to 0(00H) or “0”(30H), or 1(01H) or

“1”(31H).

CODE

HEX

FUNCTION

CODE

HEX

FUNCTION

CODE

HEX

FUNCTION

CODE

HEX

FUNCTION

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 78 79

Comments to this Manuals

No comments

Rice-lake Star SP298 Series Programmers Manual User Manual Page 35

Comments to this Manuals

Related products and manuals for Scales Rice-lake Star SP298 Series Programmers Manual