Rice-lake Star SP298 Series Programmers Manual User Manual download pdf (Page 10)

Buttons

The following table describes the function of the three control buttons of the

control panel.

Producing a test print

The following procedure can be used at any time to test the printer.

❏

Turn on the printer and insert a piece of paper (page 6, 11).

❏

Turn off printer power.

❏

While holding down

RELEASE

, turn printer back on. Keep

RELEASE

depressed for a few moments until the printer beeps and the printer test

print starts.

The printer test will continue until it reaches the end of the paper.

Adjusting the dot alignment

You may never have to use the procedure described in this section, but after you

have been using your printer for some time you may find that the dots of some

graphics do not align correctly. For example, what should look like:

may come out looking like one of the following:

Button Description

FORWARD

Feeds the slip paper forward, toward the back of the printer. One press

feeds one line, holding down performs continuous feed.

REVERSE

Feeds the slip paper back, toward the front of the printer. One press

feeds one line, holding down performs continuous feed.

RELEASE

Activates the printer's paper release (the paper is not held in place by

the paper feed roller).

Clears recoverable errors.

or like this

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 78 79

No comments

Rice-lake Star SP298 Series Programmers Manual User Manual Page 10