Rice-lake 820i Programmable Indicator/Controller - Installat User Manual Page 60
- Page / 112
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
56 820i Installation Manual
6.2 Default Print Formats
Table 6-2 shows the default print formats for the 820i and lists the conditions under which each print format is
used. The HDRFMT1 and HDRFMT2 formats are used to specify header information that can be used by the
other ticket formats. The contents of the HDRFMT
x format can be inserted into any other ticket format using the
<H1> and <H2> formatting commands.
Table 6-2. Default Print Formats
Format Default Format String Used When
GFMT GROSS<G><NL2><TD><NL> Normal mode, no tare in system
NFMT GROSS<G><NL>TARE<SP><T><NL>NET<SP2><N>
<NL2><TD><NL>
Normal mode, tare in system
ACCFMT ACCUM<A><NL><DA><TI><NL> Accumulator enabled and displayed, or
setpoint print operation with PSHACCM=ON
SPFMT <SCV><SP><SPM><NL> Setpoint print operation with PSHPRNT=ON
TRWIN <NL>ID<SP><TID><NL2>GROSS<TR1>
<NL2><DA><SP><TI><NL>
Press the Weigh In softkey, enter truck ID
number, and press enter.
TRWOUT <NL6>ID<SP><TID><NL2>GROSS<TR1><NL>TARE<SP>
<TR2><NL>NET<SP2><TR3><NL2><DA><SP><TI><NL>
Press the Weigh Out softkey, enter truck ID
number, and press enter.
TRFMT REG ID: <TID>: <TR2> SCALE<S> <TD><NL> Truck register currently displayed
ALERT <COMP><NL><COAR1><NL><COAR2><NL>
<CONM1><NL><COPH1><NL>
<CONM2><NL><COPH2><NL>
<COML><NL><ERR><NL>
Alert message is sent to specified port when
error indication is generated by an attached
iQUBE. See the iQUBE Installation Manual,
PN 77224, for more information.
HDRFMT1
HDRFMT2
COMPANY NAME<NL>STREET ADDRESS<NL>
CITY, ST ZIP<NL2>
Must be inserted into other print format
AUXFMTxx GROSS<G><NL2><TD><NL> Formats AUX1FMT—AUX20FMT
AUDITFMT Fixed format; cannot be edited
Press PRINT when audit trail is displayed, or in
response to a DUMPAUDIT serial command.
Note
In OIML and CANADA modes, the letters PT (preset tare) are automatically inserted after the printed tare weight.
Alert Format Commands
<COMP> Company name (up to 30 characters) All
<COAR1>
<COAR2>
Contact company address, lines 1–3 (up to 30 characters)
<CONM1>
<CONM2>
Contact names (up to 20 characters)
<COPH1>
<COPH2>
Contact phone numbers (up to 20 characters)
<COML> Contact e-mail address (up to 30 characters)
<ERR> Alert error message (system-generated) ALERT
See the
iQUBE Installation Manual, PN 77224, for more information about using alerts.
Command Description Supported Ticket Formats
Table 6-1. Print Format Commands (Continued)
- Installation Manual 1
- Contents 3
- W ARNING 5
- Important 5
- W arning 5
- 1.0 Introduction 6
- 1.1 Operating Modes 7
- 1.2 Indicator Operations 7
- 1.3 Softkey Operations 8
- 1.5 Summary of Changes 9
- 2.0 Installation 10
- J7 LOAD CELL 11
- J8 LOAD CELL 11
- 2.4 Installing Option Cards 12
- Figure 2-3. 820i CPU Board 13
- 2.5 Slot Assignments 14
- 2.6 Enclosure Reassembly 14
- 2.7 CPU Board Removal 14
- 2.8 Battery Replacement 15
- 2.9 Parts Kit Contents 15
- Table 2-6. Replacement Parts 16
- Installation 13 17
- 3.1 Configuration Methods 19
- 05/24/2006 20
- 02:22PM 20
- Configuration 17 21
- Shown only if 22
- Analog Output 22
- DISPLAY 22
- 3.2.1 SCALES Menu 23
- Figure 3-4. SCALES Menu 23
- SCALES Menu 24
- Configuration 23 27
- Configuration 27 31
- OFF (Continued) 33
- 3.2.2 SERIAL Menu 34
- 820i serial data formats 34
- Configuration 31 35
- 3.2.3 FEATURE Menu 39
- Figure 3-11. FEATURE Menu 39
- FEATURE Menu 39
- 3.2.4 DISPLAY Menu 45
- Figure 3-14. DISPLAY Menu 45
- 3.2.5 PFORMT Menu 46
- Figure 3-15. PFORMT Menu 46
- 3.2.6 SETPTS Menu 47
- Figure 3-16. SETPTS Menu 47
- 3.2.7 DIG I/O Menu 48
- Figure 3-17. DIG I/O Menu 48
- DIG I/O Menu 49
- 3.2.8 Analog Output Menu 50
- ALG OUT Menu 50
- Software 51
- 4.1 Gravity Compensation 52
- 4.2 Front Panel Calibration 52
- hooks or 53
- 4.4 Revolution Calibration 54
- 5.2 Configuring Scales 55
- 6.1 Print Formatting Commands 58
- 6.2 Default Print Formats 60
- 6.3 Customizing Print Formats 61
- 6.3.3 Using Serial Commands 62
- 7.1 Using the Truck Modes 63
- 7.3 Weigh-In Procedure 64
- 7.4 Weigh-Out Procedure 64
- 8.0 Setpoints 65
- 8.2 Setpoint Menu Parameters 68
- Setpoints 65 69
- Setpoints 67 71
- Setpoints 69 73
- Setpoints 71 75
- program before the batch 77
- SETPTS Menu 78
- 9.1 The Serial Command Set 83
- 0%, 20% 90
- 9.1.5 Normal Mode Commands 91
- 10.1 Troubleshooting 93
- 10.3 Serial Scale Interface 97
- 10.4 Local/Remote Operation 97
- 10.5 Custom Stream Formatting 98
- 10.6 Data Formats 100
- 10.7 Digital Filtering 101
- 820i Installation Manual 102
- 10.9 PS/2 Keyboard Interface 103
- 10.10 Audit Trail Support 104
- 10.11 Dimension Drawings 105
- 10.12 Printed Information 106
- 10.13 Specifications 107
- Operator Interface 108
- Environmental 108
- Enclosure 108
- Certifications and Approvals 108
- 820i Limited Warranty 109
- PN 93018 08/12 112
Related products and manuals for Scales Rice-lake 820i Programmable Indicator/Controller - Installat
(6 pages)© 2020, manymanuals.com. All rights reserved. | 0.087 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals