Rice Lake 250-10 Series Operations Instructions download pdf (Page 17)

Digital Handrail Scale Technical & Operating Instructions - Scale Configuration 13

5.2 Default Menu

The default menu is used to return the scale back to its factory settings and is shown in Figure 5-4.

DEFCALIBPROG

DONE

TEST

YES

Figure 5-4. Default Menu

Use the following steps to return the settings back to their factory default.

1. Press the

ENTER key. The display shows a default value of NO.

2. To change to YES, press the Up/Down arrow keys.

3. Press the

ENTER key and the display shows DONE.

4. Press the

BMI key to return to PROG/CALIB/DEF/DONE/TEST upper level menu.

Note

Selecting YES and pressing the ENTER key will reset to factory defaults settings without changing

the calibration and will return

you to weigh mode.

5.3 Scale Calibration

Use the following steps to calibrate the scale.

1. Turn on scale by pressing the

On/Off key and the ENTER key simultaneously.

2. The unit cycles through its startup fu

nction and continues to display the software version. Continue to

hold both keys until Id appears.

3. Access the setup key located in the back of the scale to ente

r the setup parameters for the scale. You can

use a small paper clip, small screwdriver or other similar object to press the setup key.

Setup switch location

on back of indicator.

Figure 5-5. Setup Switch Location on Back of Indicator

4. Prog appears on the display. Press the BMI key to toggle along the parameter menu.

Calib appears on the display and enter the calibration parameters.

6. Press the

ENTER key and a numeric value is displayed which represents the amount of weight that is used

for calibration. Lb will be flashing. To switch between lb and kg, press the

Up/Down arrow keys on the

display. Once a unit is selected, press

ENTER and the right most digit will be flashing.

7. To change the calibration load value, use the

Up/Down arrow keys to increment/decrement the flashing

digit.

8. Use the

BMI key to move the flashing digit to the left or right.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 29 30

Comments to this Manuals

No comments

Rice Lake 250-10 Series Operations Instructions Page 17

Comments to this Manuals

Related products and manuals for Kitchen scales Rice Lake 250-10 Series