Rice-lake Dual Ramp Wheelchair Scale (350-10-3) - RL350-10 T User Manual download pdf (Page 21)

Wheelchair Scale Technical Manual - Test Menu 17

9. Once all the digits have been entered, press the ENTER key and Clear is displayed.

10. Make sure the scale platform is clear of weight and press the

ENTER key again and ===== is displayed.

11. A request to put the chosen load

on the platform is displayed by Put xxx.xx.

12. Put the chosen weight on the platform and press the

ENTER key. ===== is displayed and then Save.

13. Press the

ENTER again and the display indicates Done.

14. Press the

BMI key three times to exit back out to the top level Done parameter.

15. Press the

ENTER key to return to weigh mode.

To exit calibration without changing zero or span exis

ting calibration, press the CLEAR key, then the BMI key.

6.0 Test Menu

To access the TEST menu, use the following steps.

1. Turn the scale on by pressing the

On/Off key and the ENTER key simultaneously until ID flashes.

2. Press the

ENTER key again.

3. Continue to press the

BMI key to scroll through the various menu items.

4. Once complete, press the

BMI key again and Done is displayed.

5. Press the

ENTER key to start the weighing process.

DEFCALIBPROG

DONE

TEST

VER BAT VALUE A2D

1.83

Value

Figure 6-1. Test Menu

Table 6-1. Test Menu

Test M e nu

Parameter Choice Description

VER Value Displays the current software version.

BAT Value Displays the current battery level.

VALUE Value Displays the actual value.

A2D Value Displays the actual raw counts of the scale.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 33 34

No comments

Rice-lake Dual Ramp Wheelchair Scale (350-10-3) - RL350-10 T User Manual Page 21